t8fanning
8v are still cool, right?
- Joined
- Oct 10, 2010
- Location
- Vancouver, WA
I'm trying to make some oil baffles with hinged doors for a typical b230 pan. However, I'm concerned about interference with the oil pump. Does anyone know where the oil pump inlet is located relative to the oil drain hole? Or does someone have an engine on a stand that could check?
I've seen this picture, and the sharpie outline could show the oil pump intake location, but I'm not sure.
https://secure2.pbase.com/mperry/image/45099132
I've seen this picture, and the sharpie outline could show the oil pump intake location, but I'm not sure.
https://secure2.pbase.com/mperry/image/45099132
Last edited: