So with the event coming up, i didn't want to worry about how my AFR's were like last time haha. At the junkyard, i pulled a couple LH 2.4 harnesses, one for a friend and one to use until the event, then it'll be for sale.
Don't worry, i will only be 2.4 TEMPORARILY, I promise haha.
I also thought id document the differences between 2.4 and 3.1 as i go...
I started with the throttle body and TPS. As you can tell, the 2.4 sensor is larger.
LH 3.1 (left) LH 2.4 (right)
Then the MAF which has a 6 pin connector yet only 5 on the harness for LH 2.4
LH 3.1 (left) LH 2.4 (right)
Inside LH 3.1 MAF
Inside LH 2.4 MAF
I didn't remove the 3.1 harness, just unplugged it and ran the 2.4 one around it haha. I guess I'm doing the exact opposite of a wire tuck...
I had to lengthen the MAF wires since it came from an NA car.
Also received a nice MOMO hub in the mail, now i just need a wheel