sksmith
Active member
- Joined
- Nov 14, 2007
- Location
- Back in St. Louis, MO
I just installed a new Bosch "blue" coil (#100220) and a Pertronix kit (#100902), both from IPD, on my 73 142 and now the car won't start. It stumbles like it wants to start, but dies immediately.
The kit can't be any easier to install, just two wires, remove the points & condenser, put in & gap with the .030 plastic gauge included in the kit. Red to positive & black to negative on the coil. What could I have missed?
Thanks.
The kit can't be any easier to install, just two wires, remove the points & condenser, put in & gap with the .030 plastic gauge included in the kit. Red to positive & black to negative on the coil. What could I have missed?
Thanks.