• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Size of four ball joint holder bolts on a 240

holtzboy

Project Procrastinator
Joined
Mar 7, 2004
Location
Cornelius, OR
I want to get new bolts (4 per side) for the ball joint holder to strut piece.

This thingy:

mainphpg2viewcoret.jpg


Anyone know what threading they are?
 
I'm pretty sure that I just threw out some of those very same bolts today when I was cleaning out my trunk. Good way to find out what they are is to go to the junkyard and get one of the bolts and then take it to Checkers (now O' Reillys here). They have a thing where you can just screw the bolt in and it will tell you the size and thread.
 
Make sure you get bolts with a reduced hex head that is 12mm hex with a washer flange on them. There isn't much room for a bolt head in that location.
 
Just got back from napa, got 8 m8x1.25x30 10.9 bolts with a flange head. The lady was getting frustrated so she gave them to me for free lols.
 
Back
Top