home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 10-15-2018, 09:12 AM   #1
orrob
Board Member
 
Join Date: Nov 2017
Default Wasted Spark for dumbies

Thinking about going ahead and adding a wasted spark board while my engine is torn apart on my '93 240. I have seen videos about how to install the wasted spark board. I saw that the bosch 2 x2 coil pack is recommended. I have a couple of questions though:

1. what jy might have a bosch 2 x2 coil pack (if its worth grabbing a jy version)?

2. What's the best way to plug the dizzy hole?

3. does it reuse the same crank sensor (aw70)?

4. Anything else I am missing that install videos don't show?

Thanks
orrob is offline   Reply With Quote
Old 10-15-2018, 09:20 AM   #2
JW240
All idiot, no savant
 
JW240's Avatar
 
Join Date: Aug 2004
Location: The Netherlands, Europe
Default

1 where are you? Some Fiat, Alfa and Lancia cars use the Bosch 2x2 coil. Probably unobtanium at the junk yard in the staties, here rare but available. New is 40 euro so it's not something you can save a lot on. On my 240 the old junk yard coil gives a misfire after washing the engine bat, suspect a small crack in the resin of the coil. They do fail.

2. Volvo made a freeze plug for that. 940 used it, forgot the pn.

3. Yes.

4. Dunno which video's you watched.

Follow the instructions on here (a faq somewhere) and you should be fine.
__________________
240 | 1991 | 332 KKm | B230F+T | Cosworth T3 60/63 | M90 | TrueTrack
Husaberg FE450 '12 supermoto swapped


Quote:
Originally Posted by Redwood Chair View Post
Don't forget about properly seasoning it on HF jackstands for a couple years whilst dreaming about big powah 'goals'.
JW240 is offline   Reply With Quote
Old 10-15-2018, 01:44 PM   #3
mck1117
Board Member
 
Join Date: Jul 2016
Default

1. 1999-2002 Range Rover and 1999-2004 Land Rover Discovery. They're a v8, so they have two of the Bosch coils. They do exist in junkyards, but they're ultra difficult to get out from between the intake manifold and firewall, but they do exist. Rockauto has the legit Bosch part for $45.
mck1117 is offline   Reply With Quote
Old 10-15-2018, 02:33 PM   #4
dl242gt
Can play the blues
 
dl242gt's Avatar
 
Join Date: Jun 2002
Location: S NJ, a suburb of Phila.
Default

I think you can check out the members site on here user name Duder. He sells the board and setup and should be able to direct you to a place to buy the coil pack.
dl242gt is offline   Reply With Quote
Old 10-15-2018, 08:53 PM   #5
nitroboie
Board Member
 
Join Date: Mar 2009
Location: Charlotte, NC
Default

If you happen to come across the right year and model range rover that's already been torn down then grab the coil. It's wasn't worth the hassle for me to dig that deep to get it. I bought mine on amazon for about 40 dollars; same for the ignition amplifier.

Have a read at this thread:
http://turbobricks.com/forums/showth...wpost&t=246170
nitroboie is offline   Reply With Quote
Old 10-16-2018, 06:38 AM   #6
Mbeas96
Board Member
 
Mbeas96's Avatar
 
Join Date: Aug 2017
Location: Charleston
Default

It took me 10 mins tops for the two coils from a 99 discovery. Charged me 30 bucks for both of them. Ive used both and they both work, in going on 10k miles on one of them. Pulled my ignition module off a junked miata too

Its easy to rip things apart when you dont care about it
__________________
Quote:
Originally Posted by Mr.Bill View Post
You are not a man unless you've thrown up at a turbobricks meet.

My build thread: http://forums.turbobricks.com/showthread.php?t=340910
Mbeas96 is offline   Reply With Quote
Old 10-16-2018, 06:48 AM   #7
J2_
Board Member
 
J2_'s Avatar
 
Join Date: Mar 2008
Location: Stroopwafel-land
Default

The partnr for the dizzyhole (back of the head) is 1336763. Around $5/6 iirc.
J2_ is online now   Reply With Quote
Old 10-16-2018, 12:16 PM   #8
Duder
His Dudeness, El Duderino
 
Duder's Avatar
 
Join Date: Dec 2009
Location: Torrance, CA
Default

Quote:
Originally Posted by dl242gt View Post
I think you can check out the members site on here user name Duder. He sells the board and setup and should be able to direct you to a place to buy the coil pack.
Thanks for the plug. I took over sales of the wasted spark board from Karl Buchka a few years ago since he wasn't able to continue selling them but there was still a demand.

I actually do sell the Bosch Motorsport 2x2 coil pack through my site as well. It's not some super rare or specialized part but it works really well with LH2.4 + WS and I figured people may appreciate being able to buy the major components in one place. I also sell a clone of the power stage / ignition module from the 960, which has 3 spark outputs, of which 2 can be used for wasted spark on the redblock.

There was some interest in a complete kit including finished wiring with connectors, a coil bracket, and so on. The sticking point is modification of the EZK, which I'm not set up to handle now. So the end customer would still need to crack open their EZK, solder the board in place, and then install everything.
Duder is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 09:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.