• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

VEMS 3.8 on a volvo 940 95

TurboKris

New member
Joined
Aug 17, 2019
Location
Norway
is this ECU plug and play?
I see that it has the same connection as the original brain
5a0a31ac2eaac8b1f1cbfc055eaee62e.png

is it just to plug it in and you can use all the original sensors and stuff?

is it even good?

is it best to make the wiring your self?


link to ECU:
http://ems-shop.se/ecu/vems/vems-38-b230-patch-kit
 
Looks like it should work if your car has an LH 2.4 harness. If your car uses Motronic (B230ET), then no, it won't work.

I get the desire to simplify and keep the old harness, but it's limiting in terms of features and sensors that you will likely want to use in the future. Cam position sensor, coil on plug, and sequential injection come to mind. It's an awful lot of money to spend for stuff that you will be unable to use or have to heavily rework in the future.
 
it seems like a much better ECM could be had for around that price.

Link, maxxecu, etc

And then just put some time and dough into building a harness.
 
Back
Top