960 throttle body dimensions!

Hagar17 · 07-16-2008, 01:04 AM

Anyone know if the 960 TB is thicker (longer) than a stock 16v TB?

from the intake manifold mounting surface to the end of the intake pipe flange?

My 960 TB is miles away and I've got someone making a custom intake pipe (not manifold)
that will fit when I switch to the 960 TB.

I'm thinking they are pretty close....why did I not measure it !

hep me!

If someone has a 960 TB can you measure the full length of it? (not diameter!)

the poi · 07-16-2008, 01:10 AM

from bottom of the mounting flange to the edge of the inlet lip?

edit:// wow i like, missed that phrase in the OP. I'll measure tomorrow morning if i don't forget

Hagar17 · 07-16-2008, 01:13 AM

Quote:

Originally Posted by the poi

from bottom of the mounting flange to the edge of the inlet lip?

edit:// wow i like, missed that phrase in the OP. I'll measure tomorrow morning if i don't forget

yes that's the measurement I need!

cheers in advance!

JW240 · 07-16-2008, 09:11 AM

they are the same height, thats what i remember.

Lord Tentacle · 07-16-2008, 09:22 AM

its an inch shorter than a B230 one

linuxman51 · 07-16-2008, 09:24 AM

Quote:

Originally Posted by JW240

they are the same height, thats what i remember.

same bolt patern too.

the poi · 07-16-2008, 09:47 AM

Quote:

Originally Posted by linuxman51

same bolt patern too.

woo, saves me some time

Hagar17 · 07-16-2008, 11:38 AM

Same height will work. If anyone can actually measure one (in mm!) to confirm that would be great too.

Cheers for the help!

07-16-2008, 01:04 AM	#1
Hagar17 Board Member Join Date: Jun 2005 Location: Victoria BC	960 throttle body dimensions! Anyone know if the 960 TB is thicker (longer) than a stock 16v TB? from the intake manifold mounting surface to the end of the intake pipe flange? My 960 TB is miles away and I've got someone making a custom intake pipe (not manifold) that will fit when I switch to the 960 TB. I'm thinking they are pretty close....why did I not measure it ! hep me! If someone has a 960 TB can you measure the full length of it? (not diameter!) __________________ Keeping late 80's Swedish metal alive!

07-16-2008, 01:10 AM	#2
the poi On a mission Join Date: Jan 2003 Location: Pasadena, CA	from bottom of the mounting flange to the edge of the inlet lip? edit:// wow i like, missed that phrase in the OP. I'll measure tomorrow morning if i don't forget __________________

07-16-2008, 09:11 AM	#4
JW240 visst Join Date: Aug 2004 Location: The Netherlands, Europe	they are the same height, thats what i remember. __________________ 240 \| 1991 \| 271 KKm \| B230F+T \| M90H \| fuel:E85 Amazon/121 \| 1968 \| finished 2016+?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-16-2008, 11:38 AM	#8
Hagar17 Board Member Join Date: Jun 2005 Location: Victoria BC	Same height will work. If anyone can actually measure one (in mm!) to confirm that would be great too. Cheers for the help!