240s with 700/900 series Hova tails

[pinguin]

I've seen pictures somewhere, how difficult is it to make it work?

[Hodginsa]

I think I've seen the bolt pattern on both, and it would be simple for the most part(If I kthink I know what Hovas are) They just have a 5th bolt compared to the 240 ones with only 4, it would require drilling on the 240, but you could probably do it by eye.

[2fast242gt]

Originally Posted by crazy0000

I think I've seen the bolt pattern on both, and it would be simple for the most part(If I kthink I know what Hovas are) They just have a 5th bolt compared to the 240 ones with only 4, it would require drilling on the 240, but you could probably do it by eye.

i think it would be far form simple. the indent in teh 1/4 panel would be diffrent and you would have to section that indented part from a 7xx or 9xx part into the quarter. i kinda wana try this on my 91 240... its a pile looks wise anyways with rust and such.

[2fast242gt]

http://forums.turbobricks.com/showth...ght=conversion