MS2 Extra setup

Shagrageous · 06-20-2009, 08:33 PM

I'm try'n to get all my ducks lined up for a MS install and have set the software up to the best of my knowledge. I'm hopin someone could take a look at my .msq and check it over and offer any advice/corrections. It's a 86 740 Turbo- stock rebuilt turbo, mild ported and polished head and intake, stock exhaust, Mallory HyFire6 box, IPD Turbo cam and gear(set at +2.5) and 38lb High Imp injectors. I am running the latest MS2 Extra release and using Tuner Studio for programming. Any help would be greatly appreciated

Just noticed I can't post an attachment so here's a link to the .msq
http://www.mediafire.com/?hn5iwjj9mvx

dbh86 · 06-21-2009, 03:58 AM

I don't have the stuff on this computer to look at your .msq, but it's pretty hard to get it so messed up that it won't run. I hope you have a wideband to tune with.

Shagrageous · 06-21-2009, 08:57 AM

Yessir, I have an LC-1, forgot to mention that

Shagrageous · 07-07-2009, 10:55 PM

Alright, I'm up and running with pretty much minimal cuss and fuss. The main bitch so far has ben the idle, but most of that was due to ignorance. I do have a problem getting warmup enrichment to turn off. I know it's prolly something simple but I can't find what's wrong so far. Anyone got any suggestions? I feel like I'm overlooking something, and I'm pretty sure WUE shouldn't still be on at 185F after 20 miles of driving. Anyone care to steer me in a direction or ran across this before?

dbh86 · 07-08-2009, 04:32 AM

Look at the WUE tables and see what your temperatures are set at? It could be at 101%, which is minimal, but still say it's in WUE.

linuxman51 · 07-08-2009, 09:18 AM

are you sure the coolant temp sensor is working properly for the MS?

Shagrageous · 07-08-2009, 05:47 PM

Yessir, it's working correctly. In between jobs today I scaled my % to where I ended up with 100 at 160 instead of 70 and it now works correctly!!!! Must be some kinda bug, or I'm not supposed to go below 100? Either way i appreciate the ideas and responses!!!

06-20-2009, 08:33 PM	#1
Shagrageous Newbie Join Date: Jan 2008 Location: Kershaw, SC	MS2 Extra setup I'm try'n to get all my ducks lined up for a MS install and have set the software up to the best of my knowledge. I'm hopin someone could take a look at my .msq and check it over and offer any advice/corrections. It's a 86 740 Turbo- stock rebuilt turbo, mild ported and polished head and intake, stock exhaust, Mallory HyFire6 box, IPD Turbo cam and gear(set at +2.5) and 38lb High Imp injectors. I am running the latest MS2 Extra release and using Tuner Studio for programming. Any help would be greatly appreciated Just noticed I can't post an attachment so here's a link to the .msq http://www.mediafire.com/?hn5iwjj9mvx

07-08-2009, 09:18 AM	#6
linuxman51 ARRRRHARHAR Join Date: Dec 2002 Location: mont, AL	are you sure the coolant temp sensor is working properly for the MS? __________________ "They bum rushed them in their own crib, they drank all their beer, they partied with their ladies and they left with the trophy" Megasquirt Tuning! Plug and play LH 2.4 Megasquirt, now with stealth mode! ported volvo heads

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-21-2009, 08:57 AM	#3
Shagrageous Newbie Join Date: Jan 2008 Location: Kershaw, SC	Yessir, I have an LC-1, forgot to mention that

07-07-2009, 10:55 PM	#4
Shagrageous Newbie Join Date: Jan 2008 Location: Kershaw, SC	Alright, I'm up and running with pretty much minimal cuss and fuss. The main bitch so far has ben the idle, but most of that was due to ignorance. I do have a problem getting warmup enrichment to turn off. I know it's prolly something simple but I can't find what's wrong so far. Anyone got any suggestions? I feel like I'm overlooking something, and I'm pretty sure WUE shouldn't still be on at 185F after 20 miles of driving. Anyone care to steer me in a direction or ran across this before?

07-08-2009, 04:32 AM	#5
dbh86 What's a 16V? Join Date: Mar 2005 Location: San Antonio, TX	Look at the WUE tables and see what your temperatures are set at? It could be at 101%, which is minimal, but still say it's in WUE.

07-08-2009, 05:47 PM	#7
Shagrageous Newbie Join Date: Jan 2008 Location: Kershaw, SC	Yessir, it's working correctly. In between jobs today I scaled my % to where I ended up with 100 at 160 instead of 70 and it now works correctly!!!! Must be some kinda bug, or I'm not supposed to go below 100? Either way i appreciate the ideas and responses!!!