Need MS Help its a whiteblock

lclark96 · 08-31-2009, 05:00 PM

This is on my 850 turbo 5cyl.:

Finally working on this car again, just made a datalog to post to see if anyone could help me out with my MS problems. on this log i got 1 reset. I was cranking the engine over, as it will not start. I am not getting any spark right now. Running a COP setup.
Any help appreciated!

Matt Cramer · 09-01-2009, 12:29 PM

I don't see a reset in the log; these usually show up as "MARK 1 RESET" or a different number. The good news is you are getting an RPM signal; I'd focus on the spark output at this point.

lclark96 · 09-08-2009, 02:45 PM

Thanks matt! Ill contact u to send my cpu back and have u all check it. I think now I may have fried the outputs maybe..

DNAsEqUeNcE · 09-08-2009, 03:59 PM

Can you run a test on the outputs?

lclark96 · 03-28-2010, 09:09 PM

Matt has ecu and coilpacks.. waiting to hear back on whats up

09-01-2009, 12:29 PM	#2
Matt Cramer Board Member Join Date: Sep 2008	I don't see a reset in the log; these usually show up as "MARK 1 RESET" or a different number. The good news is you are getting an RPM signal; I'd focus on the spark output at this point. __________________ Matt at DIYAutoTune.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-08-2009, 02:45 PM	#3
lclark96 voLvO tWeaKeR Join Date: Feb 2008 Location: Kingsport, Tennessee	Thanks matt! Ill contact u to send my cpu back and have u all check it. I think now I may have fried the outputs maybe..

03-28-2010, 09:09 PM	#5
lclark96 voLvO tWeaKeR Join Date: Feb 2008 Location: Kingsport, Tennessee	Matt has ecu and coilpacks.. waiting to hear back on whats up