|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
03-27-2012, 09:21 PM
|
#1 |
|
Board Member
Join Date: Jun 2005
Location: Victoria BC
|
B204FT intake manifold on B234f....
In a 740
who`s done this and what problems did you have? curious about issues with clearance for strut a tower brace and how you mounted throttle body linkage etc. also how did this affect off boost performance? and yes this is for a boosted application. cheers and thanks mock-ups to happen soon...
__________________
Keeping late 80's Swedish metal alive! 
|
|
|
|
03-27-2012, 09:44 PM
|
#2 |
|
inept from birth
Join Date: Apr 2010
|
If you use the stock b234 fuel rail, you'll have to cut the stock mounting tabs, bend the fuel return line out of the way, and make new mounting tabs.
The idle hose routing was a little wonky, but worked. Can't tell you about strut tower brace clearance, but this fits fine in a 240. I lucked out and the intake I purchased came with throttle spool. To date, I've driven with the b204ft intake in the car for about 2 weeks and haven't noticed a single difference between that and my frankenstein intake manifold. VE tables look the same. |
|
|
|
|
03-28-2012, 12:29 PM
|
#3 |
|
"YOU'RE" is a word.
Join Date: Nov 2002
Location: California
|
__________________
1975 244-Turbo. 2550lbs. Ethanol 1990 245-28mpg M47 DD |
|
|
|
|
03-31-2012, 01:20 PM
|
#4 |
|
Board Member
Join Date: Jun 2005
Location: Victoria BC
|
no one?
|
|
|
|
|
03-31-2012, 03:55 PM
|
#5 |
|
inept from birth
Join Date: Apr 2010
|
what exactly where you looking for again?
|
|
|
|
|
03-31-2012, 08:19 PM
|
#6 |
|
Board Member
Join Date: Sep 2010
Location: Netherlands
|
+1
|
|
|
|
|
03-31-2012, 08:26 PM
|
#7 |
|
There's a gif for that.
Join Date: Dec 2002
Location: Bellingham, WA and Seattle, WA
|
Seems to work fine.
__________________
 I'm looking to buy the following - PM me if you've got any of it: B234 blocks & heads, 93 850 bumper, ford 8.8", T5 WC I am extremely offended and have blocked [someone]. - brett Adrian is omniscient, you will never escape his wrath. - 500dollar744ti doug was here |
|
|
|
|
03-31-2012, 08:35 PM
|
#8 |
|
Board Member
Join Date: Sep 2003
Location: Ma
|
well i used one for a little while on my 16v 780 turbo. worked fine. even put a 960 throttle body on it.
|
|
|
|
|
04-01-2012, 12:51 PM
|
#9 |
|
Board Member
Join Date: Jun 2005
Location: Victoria BC
|
So strut tower brace (mvp in this case) will fit and off boost performance is not adversely affected and its pretty much a bolt on then....
Ok thx |
|
|
|
|
04-03-2012, 07:07 AM
|
#10 |
|
Board Member
Join Date: Sep 2010
Location: Netherlands
|
I think there are not to many people having both a MVP strut tower brace and a B204FT manifold.
B204FT manifolds are rare. B204FT manifolds with MVP strut tower brace are even more rare. Only one way to find out. Try it! |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
