Drift Brick
New member
- Joined
- Oct 8, 2014
- Location
- Seatac
How nice would it be to adjust your ride height, dampening rate, and front camber, all while swapping tires on track day? Your dream can now become a reality with this kit.
Pic is of front coilovers welded and fully installed onto stock volvo spindle as per BC Racing instructions.
The manufacturer is BC Racing USA
http://www.bcracing-na.com/
A search through their current application list will NOT show a kit listed for the 7 or 9 series volvo. The part number to use when speaking to their sales rep while placing your order is ZG09
The cost is around $1085 US dollars shipped.
At this point i only know that BC Racing North America has this kit available (After waiting 3-5 weeks to be manufactured to your specs) Perhaps someone outside the US can speak with their BC racing providers and see if said part number works worldwide?
This kit fits my strut tubes (For Sure) of the 87-90 740. do your homework and ensure the 9 series you have has the earlier style strut tubes to ensure fitment. maybe someone can post any info of strut tube variances?
If you have a jack and stands, a welder, a basic metric tool kit and the ability to do wheel bearings, tie rod ends, and balljoints, then you too can install this kit in a weekend. I recommend having a professional welder, weld the coilover kit to your front knuckle/ spindle / tube assembly if you have any doubts of your welds holding. SAFETY FIRST.
Once i learn how to post images to this Thread from my laptop, i will give pics of points of adjustment and the rear suspension setup in this kit.
Enjoy
Pic is of front coilovers welded and fully installed onto stock volvo spindle as per BC Racing instructions.
The manufacturer is BC Racing USA
http://www.bcracing-na.com/
A search through their current application list will NOT show a kit listed for the 7 or 9 series volvo. The part number to use when speaking to their sales rep while placing your order is ZG09
The cost is around $1085 US dollars shipped.
At this point i only know that BC Racing North America has this kit available (After waiting 3-5 weeks to be manufactured to your specs) Perhaps someone outside the US can speak with their BC racing providers and see if said part number works worldwide?
This kit fits my strut tubes (For Sure) of the 87-90 740. do your homework and ensure the 9 series you have has the earlier style strut tubes to ensure fitment. maybe someone can post any info of strut tube variances?
If you have a jack and stands, a welder, a basic metric tool kit and the ability to do wheel bearings, tie rod ends, and balljoints, then you too can install this kit in a weekend. I recommend having a professional welder, weld the coilover kit to your front knuckle/ spindle / tube assembly if you have any doubts of your welds holding. SAFETY FIRST.
Once i learn how to post images to this Thread from my laptop, i will give pics of points of adjustment and the rear suspension setup in this kit.
Enjoy
Last edited: