|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
04-04-2020, 04:17 PM
|
#1 | |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Deb the 940
 Picked it up for 950, needs a couple maintenance things but not much Cant wait to start with the mods, but maintenance first, the boring ****
__________________
94 940T "Deb" build under way http://forums.turbobricks.com/showthread.php?t=354303 B5.5 passat wagon, low af sexier than most wagons here. Quote:
|
|
|
|
|
04-04-2020, 07:49 PM
|
#2 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Got a water pump(it needs it) took out the ic started removing the turbo, ordering a new ic and turbo, and piping for the 3" amm right now
 |
|
|
|
|
04-04-2020, 07:51 PM
|
#3 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
 |
|
|
|
|
04-05-2020, 12:06 AM
|
#4 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Throwing around the idea of hood/fender exit for exhaust, dont mind loud, my jeep was a 5.2 with open exhaust....very loud, thoughts?
|
|
|
|
|
04-05-2020, 04:48 AM
|
#5 |
|
Kombinationskraftwagen
Join Date: Jan 2012
Location: München
|
Loud is one thing, the broken garden tractor sound another.
__________________
IDKFA |
|
|
|
|
04-05-2020, 01:27 PM
|
#6 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Good point
|
|
|
|
|
04-06-2020, 08:43 PM
|
#7 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Had to finish wiring up my cams today but got a little time in.
   got some recycling |
|
|
|
|
04-07-2020, 11:28 PM
|
#8 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Didnt get too far today, put together my new couch. Got the mani and turbo off though.
 Last edited by Wilford Brimley; 04-08-2020 at 02:46 AM.. |
|
|
|
|
04-07-2020, 11:29 PM
|
#9 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
 The good 13c is for sale if anyone wants it |
|
|
|
|
04-07-2020, 11:33 PM
|
#10 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
|
|
|
|
|
04-08-2020, 05:21 PM
|
#11 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
 Got the new water pump on, no the amm is not going there |
|
|
|
|
04-09-2020, 06:39 PM
|
#12 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
 free picture upload forgot how much this needed to be opened up Well the 13c sure is cute! I'm currently clocking the turbo whilst sitting at my kitchen table drinking wine  Last edited by Wilford Brimley; 04-09-2020 at 08:04 PM.. |
|
|
|
|
04-09-2020, 08:51 PM
|
#13 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
 got it clocked now just need the feed and drain which should be here tomo |
|
|
|
|
04-09-2020, 09:00 PM
|
#14 |
|
Board Member
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
|
I'd swap to the bigger water pump pulley so you'd have less water pressure at higher racing rpm.
__________________
1988 245 White slicktop M47 Wagon! 93 b230f. LH 2.4 STS flat flywheel. 1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 548K 1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in. 1995 940 White racing wagoon. T25 .64 a/r m90 to put in 
|
|
|
|
|
04-11-2020, 09:44 PM
|
#15 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Got my shower redcoated....that was fun
 but I did get the ac out and got the intercooler put in and cold side piping figured out. Have the turbo in place to try to figure out intake and hotside piping. Have an MBC and downpipe on the way. Also got the gauge pod in and screwing with wiring, weee! free image upload |
|
|
|
|
04-17-2020, 10:24 PM
|
#16 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
 Anyone remember which size bolts hold these on? Also the 0g and 4g wiring is for my beats  |
|
|
|
|
04-17-2020, 10:27 PM
|
#17 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Also trying to figure out the an of this kinguawa(or whatever it is) feed is for the m14x1.5-?an adapter. The one on the turbo is -4an...no idea what the other side is
 3" dp on the way...still, also got a nice mbc. It's making headway! Last edited by Wilford Brimley; 04-22-2020 at 09:08 PM.. |
|
|
|
|
05-03-2020, 10:50 PM
|
#18 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
 got to play a little today. Got the turbo on, oil feed on, drain is done, oil pressure sender on, mbc on and mounted, oil cooler arm back on welded a vband onto 3" dp, and of course some paint |
|
|
|
|
05-03-2020, 10:52 PM
|
#19 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
 |
|
|
|
|
05-04-2020, 01:28 AM
|
#20 |
|
Board Member
Join Date: Sep 2017
|
I like it. Automatic transmission? It will certainly crush some souls when done.
|
|
|
|
|
05-04-2020, 01:25 PM
|
#21 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Yeah its autotragic, gonna get the accum mod though. Looking for a turbo cam/gear now
|
|
|
|
|
05-04-2020, 01:43 PM
|
#22 |
|
<Master Tech>
Join Date: Nov 2002
Location: California
|
That poor old head gasket is gonna pop
__________________
No Start Thread |
|
|
|
05-04-2020, 08:58 PM
|
#23 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Yeah it's ok, easy fix as we all know
|
|
|
|
|
05-04-2020, 08:59 PM
|
#24 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
Already ready to blow that hg;)
 |
|
|
|
|
05-04-2020, 09:16 PM
|
#25 |
|
LOCAL ONLY
Join Date: Jun 2008
Location: Marysville, wa
|
I am considering getting an extra hg and blots for when it does happen. I fully expect it....ill have a wideband and what not but eh, it's an old gasket
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
