|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
07-11-2002, 09:34 AM
|
#1 |
|
Newbie
Join Date: Jan 2003
Location: Gold Coast, Australia
|
B234 in a 140
Hello
Just wondering if anyone knows of someone that has fitted a B234 to a 140 or if you know if it is even possible. Also would it be possible to fit a turbo this setup. I have seen it once but it was in a tubular chassis car with a flip down front so that was a different matter all together. Thankyou Adam |
|
|
|
07-04-2006, 02:21 PM
|
#2 |
|
Board Member
Join Date: Nov 2002
Location: sacramento / elk grove, california
|
anything is possible, bucko
__________________
my car: 1981 240 turbo myspace this is my signature ***You Are a Martini***  There's no other way to say it: you're a total lush. You hold your liquor well, and you hold a lot of it! What Mixed Drink Are You? http://www.blogthings.com/whatmixeddrinkareyouquiz/ this is the end my signature |
|
|
|
|
07-04-2006, 03:45 PM
|
#3 |
|
Board Member
Join Date: Aug 2004
Location: Finland
|
It can be done, you need some fabricating of the parts.. It still is easyer to do a tube front at the same (just my opinion). I dont have pics unfortunately, but you have a lot of room with 8v like this:
__________________
-Kuikka- |
|
|
|
|
07-04-2006, 04:07 PM
|
#4 |
|
Board Member
Join Date: Sep 2005
Location: Detroit
|
http://forums.turbobricks.com/showth...hlight=16v+140
 Still gathering parts to start building the engine.
__________________
(\_/) (O.o) (> <)This is Bunny. Copy Bunny into your signature to help him on his way to world domination |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
