Power to Manual Steering Swap

Hank Scorpio · 01-28-2003, 02:42 AM

Well, heres another thing that people have asked about. I basicly took the stock power steering rack and gimped it into manual steering. I did this by draining the rack of most of its fluid. Then, I used a saw (sawzall ofcourse!) to shorten the metal line that come off the rack. I then cut the rubber return (low pressure) line to a shorter length and sleaved it over the metal line.

This picture should explain it better:

Over all, I'm more than thrilled with it, very very very few bad side effects. Plus, look at all this room I freed up!

01-28-2003, 02:42 AM	#1
Hank Scorpio Chubfest 2009 Survivor Join Date: Nov 2002 Location: The neighborhood with the ******* guitar player.	Power to Manual Steering Swap Well, heres another thing that people have asked about. I basicly took the stock power steering rack and gimped it into manual steering. I did this by draining the rack of most of its fluid. Then, I used a saw (sawzall ofcourse!) to shorten the metal line that come off the rack. I then cut the rubber return (low pressure) line to a shorter length and sleaved it over the metal line. This picture should explain it better: Over all, I'm more than thrilled with it, very very very few bad side effects. Plus, look at all this room I freed up! __________________ Will trade guitars/guitar parts for go fast goodies or stuff I need. Just PM. www.kauerguitars.com the second best way to upset neighbors and alienate people. History: Car 1 \| Car 2 \| Car 3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode