'83 244 Turbo

smith_t240 · 02-17-2007, 05:11 PM

Can't wait to get this stuff installed!

Sorry for the dark pictures...

Vol242vo · 02-17-2007, 05:40 PM

Damn you to hell you lucky bastard!

CAPT_BLOTTO · 02-17-2007, 05:49 PM

damn son! you got everything!

Acid8000 · 02-17-2007, 06:08 PM

Woah, big budget!

Gonna be a nice ride with all those installed!

McLovin · 02-17-2007, 06:27 PM

I'm diggin' the wheels. What are they?

CAPT_BLOTTO · 02-17-2007, 06:29 PM

Quote:

Originally Posted by mwveenhu

I'm diggin' the wheels. What are they?

titans from an 850

Mesoam · 02-17-2007, 06:42 PM

WOW thats a load and 1/2...get a raise? make a hit for the mob?

i hope those titans will clear as they aren't 8's like pegs...

pat244ti · 02-17-2007, 06:46 PM

with spacers they should clear totally fine.

Now get it all on the car!

McLovin · 02-17-2007, 07:13 PM

Ahhh so that's what a Titan looks like. Not bad not bad... who am I kidding. Iwant.

02-17-2007, 07:41 PM

Nice nice

02-17-2007, 08:53 PM

so what line of work are you in? crack sales?

nice haul.

RedFridge · 02-17-2007, 09:01 PM

You are so going to love those poly's and coilovers.

Chris_R · 02-17-2007, 09:43 PM

What coilovers are those?

oh yeah - goddamn son! Rob a bank?

klr142 · 02-17-2007, 10:34 PM

Seriously. Talk about all at once...

Awesome!

smith_t240 · 02-17-2007, 11:15 PM

Those are Ben's (blkaplan) coilovers.. ok I'll try to spell it ... Kaphalkene somethign like that.

Yeah it really is going to be all at once! I've been saving these parts for a while.. so no I didn't rob a bank!

Not pictured:

15g
16 valve head (probably going with the 531 though)
MSnS is on its way
flat hood
86+ front end (have to buy this yet)
90+s
120k '95 squirter block
adjustable ipd panhard bar
25mm ipd sways
slim brake booster just to clean up the engine bay
large npr
non-ac ps brackets
100 amp denso alts

Pretty sure thats all of it!

BTW, this is going on this car:

dl242gt · 02-18-2007, 12:00 AM

That's the kind of work that's fun to do.

I'd also suggest you get the head ported and flowed professionally. It'll be worth it for the flow improvement. The engine will run even better as a high flow system.

Have fun installing all those goodies!

~~speedn_j~~ · 02-18-2007, 01:08 AM

daym dude i'm drooling over the brakes and coilovers.

pat244ti · 02-18-2007, 01:47 AM

A big f-yeah to done up 244's.

BDKR · 02-18-2007, 03:12 AM

That's going to be a nice ride!

Husker4volvo · 02-18-2007, 03:25 AM

Wow thats very impressive... Nice car to

badvlvo · 02-18-2007, 08:56 AM

Nice goodies. Now get to work and install it.

smith_t240 · 02-18-2007, 12:34 PM

Maybe I should just have this turned into a project thread.... Hopefully most of this stuff will be installed by spring/summer.

dlot, who should I have port the 531? I don't know any one around here.

blkaplan · 02-18-2007, 12:54 PM

Looking good son, can't believe those coilovers and plates aren't installed yet

smith_t240 · 02-24-2007, 09:32 PM

The old and tired B21FT

Abused flywheel

Old M46 that I will reuse and try not to blow up

So empty..

Need to get the 86+ front end on

Squirter block waiting for new gaskets and seals

Squirters, yes!

I'd like to use this style oil cooler, but I am pretty sure it won't fit with the 3" dp in a 240

On an engine I paid too much for, the threads in #1 for the spark plug are stripped out... yay.. I wrote the company an email back and never heard from them.. *******s

Chillin in the garage

MMM gauges

240 diesel under dash mats, leftover from when this was my daily driver

More goodies

This will be after I'm through with the 531

Fresh snowfall - the cars that don't get driven in the snow

Hakkas... love 'em

Enjoy! I will make this my project thread.

Lord Tentacle · 02-24-2007, 09:53 PM

Dammit i'm going to have to up my game
when did u get a 16v?

02-17-2007, 05:40 PM	#2
Vol242vo Keep it clean... Join Date: Feb 2005 Location: Spokane, WA	Damn you to hell you lucky bastard! __________________ Derek 1 Owner - 85k mile 1980 242 Recaro LX Bs - 16" ARE 398s - 25/25 Sway Bars - Bilstein HDs - SuperPro Poly/STS Derlin Bushings - MSD - R Sport Wheel -Project Thread- Follow on IG: @vol242vo

02-17-2007, 05:49 PM	#3
CAPT_BLOTTO #Crush It Join Date: Jul 2005 Location: Kansas City	damn son! you got everything! __________________ Hello My Glorious! Junkyard Parts request thread! Mesquite FB page! Constant updates! Da Yellow Sold \| $800 245 \| 77 244

02-17-2007, 06:08 PM	#4
Acid8000 Board Member Join Date: May 2005 Location: Victoria, BC - Canada	Woah, big budget! Gonna be a nice ride with all those installed! __________________ Daily Driver: '83 242Ti w/ B21FTi and M46. IPD Sways, Bilstein HD Struts, Lowering Coils. Mistu 13c @ 10psi - Her name is Domino. Hi my name is Jason, i'm addicted to boost

02-17-2007, 06:42 PM	#7
Mesoam Board Member Join Date: Jul 2004 Location: CT	WOW thats a load and 1/2...get a raise? make a hit for the mob? i hope those titans will clear as they aren't 8's like pegs... __________________ 08 XC90 R-Sport

02-17-2007, 06:46 PM	#8
pat244ti Moderator Join Date: Dec 2002 Location: Santa Cruz CA	with spacers they should clear totally fine. Now get it all on the car! __________________ - Patrick 83 244ti - rally 73 1800es - resto mod cruiser 83 244ti - road race 79 262c - road race in the works 08 c30 T5 - daily recce car - M66, Lifted 1.5'', 215/65/16 Falken All Terrains on Method MR502's, iPD skid plate 97 Dodge Dakota 5.2 4x4 70 Ford F100 2WD 351M/C6

02-17-2007, 07:13 PM	#9
McLovin Board Member Join Date: Jan 2007 Location: Ann Arbor, Michigan	Ahhh so that's what a Titan looks like. Not bad not bad... who am I kidding. Iwant.

02-17-2007, 08:53 PM	#11
740ATL Guest	so what line of work are you in? crack sales? nice haul.

02-17-2007, 09:01 PM	#12
RedFridge Board Member Join Date: May 2003 Location: Portland Oregon	You are so going to love those poly's and coilovers.

02-17-2007, 10:34 PM	#14
klr142 Turbo, what? Join Date: May 2004 Location: OR	Seriously. Talk about all at once... Awesome! __________________ Kyle - NLMGG: '91 244 NA DD/Track - General Leif: '71 142 Endurance Racecar - The General's FB page - Oregon Volvo Tuners - Died - 2014 S60 T5 - 2006 Elantra DD

02-17-2007, 11:15 PM	#15
smith_t240 Abnormally Aspirated Join Date: Jun 2004 Location: Milwaukee, WI 53211	Those are Ben's (blkaplan) coilovers.. ok I'll try to spell it ... Kaphalkene somethign like that. Yeah it really is going to be all at once! I've been saving these parts for a while.. so no I didn't rob a bank! Not pictured: 15g 16 valve head (probably going with the 531 though) MSnS is on its way flat hood 86+ front end (have to buy this yet) 90+s 120k '95 squirter block adjustable ipd panhard bar 25mm ipd sways slim brake booster just to clean up the engine bay large npr non-ac ps brackets 100 amp denso alts Pretty sure thats all of it! BTW, this is going on this car:

02-18-2007, 12:00 AM	#16
dl242gt Happy playing the blues Join Date: Jun 2002 Location: S NJ, a suburb of Phila.	Nice work load That's the kind of work that's fun to do. I'd also suggest you get the head ported and flowed professionally. It'll be worth it for the flow improvement. The engine will run even better as a high flow system. Have fun installing all those goodies! __________________ Dave, 1982 242 turbo. 338k miles. MVP coilovers and 3" exhaust. Flowed 405 with a V15. Cossie turbine housing with upgraded compressor housing. 90+, IPD remote oil filter. Some other goodness, too. Been lots of fun over 25 years. Restored in 2k. Now ready for a 2nd restoration. 1993 245 Classic, 430k miles, enem V15. IPD bars and chassis braces. Simons sport exhaust from Scandix. sbabbs ezk chip. Been a good road warrior. Genuine Volvo rebuilt leaky M47.

02-18-2007, 01:08 AM	#17
~~speedn_j~~ Banned Join Date: Sep 2005 Location: bakersfield, ca	daym dude i'm drooling over the brakes and coilovers.

02-18-2007, 01:47 AM	#18
pat244ti Moderator Join Date: Dec 2002 Location: Santa Cruz CA	A big f-yeah to done up 244's.

02-18-2007, 03:25 AM	#20
Husker4volvo Board Member Join Date: Jul 2004 Location: Clackamas, Oregon	Wow thats very impressive... Nice car to __________________ Volvo less for now looking for a 240 turbo wagon...

02-18-2007, 08:56 AM	#21
badvlvo Bad for Babies Join Date: Feb 2006 Location: Marina, California	Nice goodies. Now get to work and install it. __________________ RIP BADVLVO 3/1/1980-10/10/2015 Died at age 35 93 245 m47 300k miles, one owner, zero compression

02-17-2007, 07:41 PM	#10
V Tuning S70 Guest	Nice nice

02-18-2007, 12:34 PM	#22
smith_t240 Abnormally Aspirated Join Date: Jun 2004 Location: Milwaukee, WI 53211	Maybe I should just have this turned into a project thread.... Hopefully most of this stuff will be installed by spring/summer. dlot, who should I have port the 531? I don't know any one around here.

02-24-2007, 09:32 PM	#24
smith_t240 Abnormally Aspirated Join Date: Jun 2004 Location: Milwaukee, WI 53211	More pictures The old and tired B21FT Abused flywheel Old M46 that I will reuse and try not to blow up So empty.. Need to get the 86+ front end on Squirter block waiting for new gaskets and seals Squirters, yes! I'd like to use this style oil cooler, but I am pretty sure it won't fit with the 3" dp in a 240 On an engine I paid too much for, the threads in #1 for the spark plug are stripped out... yay.. I wrote the company an email back and never heard from them.. *******s Chillin in the garage MMM gauges 240 diesel under dash mats, leftover from when this was my daily driver More goodies This will be after I'm through with the 531 Fresh snowfall - the cars that don't get driven in the snow Hakkas... love 'em Enjoy! I will make this my project thread.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode