Turbobricks Forums

Turbobricks Forums (https://forums.turbobricks.com/index.php)
-   performance & modifications (https://forums.turbobricks.com/forumdisplay.php?f=13)
-   -   B234F to B230FT swap problem, cold start. (https://forums.turbobricks.com/showthread.php?t=291924)

REDBLOCK 02-26-2014 05:19 PM

B234F to B230FT swap problem, cold start.
 
Hi guys i have some problem with start the cold engine after swap. Before it , everything was fine, after swap B230FT into B234F place, cant start cold engine. Temp sensor- checked. My setup B230FT, 012 AMM, 937ECU+ Mike chips, walbro GS 344 intank, T5 orange injectors. Warm engine start fine.

REDBLOCK 02-27-2014 06:27 PM

car runs on cold engine now, temp sensor conector was broken=no signal.

Close this thread!


All times are GMT -4. The time now is 07:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.