Turbobricks Forums

Turbobricks Forums (https://forums.turbobricks.com/index.php)
-   showroom (https://forums.turbobricks.com/forumdisplay.php?f=16)
-   -   Bulbs for 760/960 eCodes (https://forums.turbobricks.com/showthread.php?t=360038)

lookforjoe 04-21-2021 08:51 PM

Bulbs for 760/960 eCodes
 
I have the old Ecodes from my 960 - stored for the last 15 years - going to use them in my '91 745 - I don't recall what the 3 bulbs that are used with them. No markings on them to indicate

Anyone know offhand? H1? H4?

https://i.postimg.cc/kgXDDdSB/Old-Cars00035.jpg

Fa182 04-22-2021 04:05 AM

https://i.ebayimg.com/00/s/MTIwMFgxN...gEZ8a/$_59.JPG

lookforjoe 04-22-2021 06:38 AM

@Fa182 - many thanks!

lookforjoe 04-25-2021 10:26 PM

Quote:

Originally Posted by Fa182 (Post 6177968)
pic

Question - do you have the pin schematic for the 4pole connector on your headlamps?

Fa182 04-26-2021 07:10 AM

2 Attachment(s)
From my 97/98 Greenbook:

First picture is for low / high beams (pins 1,2) and second picture is for the fogs (pin 3)
Ground for both is pin 4.

lookforjoe 04-27-2021 01:10 PM

Quote:

Originally Posted by Fa182 (Post 6179077)
From my 97/98 Greenbook:

First picture is for low / high beams (pins 1,2) and second picture is for the fogs (pin 3)
Ground for both is pin 4.

Thank you, Sir!

lookforjoe 06-23-2021 11:55 AM

Quote:

Originally Posted by Fa182 (Post 6177968)

I assumed the lower H3 (2) is the fog - however them seem to point at the sky (!) The DEPO lamps don't have very good adjusters. Is the lower inner in fact the foglamp?

ZVOLV 06-23-2021 03:26 PM

It's the high beam.

The circuit is really easy to figure out once you remove the rear caps.

Fa182 06-23-2021 03:41 PM

Quote:

Originally Posted by ZVOLV (Post 6195074)
It's the high beam.

That is wrong.

The lower inner H3 is the fog light.
The upper inner H3 is the high beam.

It's been a while, but as far as I can remember you can only adjust the fog lights horizontally, not vertically with adjuster knob.
So there must be something wrong with the insert, it's a separate piece from the big reflector that is held in via a clip or something. I don't remember exactly.

Part 27 on the diagram.

https://oem.alpics.info/pics/VOLVO20.../438/43887.gif

lookforjoe 06-24-2021 07:30 AM

Quote:

Originally Posted by Fa182 (Post 6195079)
That is wrong.

The lower inner H3 is the fog light.
The upper inner H3 is the high beam.

It's been a while, but as far as I can remember you can only adjust the fog lights horizontally, not vertically with adjuster knob.
So there must be something wrong with the insert, it's a separate piece from the big reflector that is held in via a clip or something. I don't remember exactly.

Part 27 on the diagram.


Many thanks for the confirmation & schematic. I'll have to take it off & see what I can see with the innards. The Depot version has simplified adjusters (only two, no center one) - the inner does the height, the outers do nothing...

lummert 06-30-2021 01:00 PM

Thinking you may have to do a bit of work to fit 760/960 front light and grille parts to a 740. Maybe with mounting parts from a 940.

lookforjoe 07-01-2021 08:37 AM

Quote:

Originally Posted by lummert (Post 6196550)
Thinking you may have to do a bit of work to fit 760/960 front light and grille parts to a 740. Maybe with mounting parts from a 940.

Its not bad at all on a 91 - just had to modify (cut & weld) the inner metal mount brackets for the revised offset, and trim the plastic filler cap

https://i.postimg.cc/XvkPJR7L/PXL-20...-205102520.jpg

https://i.postimg.cc/y89tqJMw/PXL-20...-223205789.jpg


All times are GMT -4. The time now is 03:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.