Turbobricks Forums

Turbobricks Forums (https://forums.turbobricks.com/index.php)
-   maintenance & nonperformance (https://forums.turbobricks.com/forumdisplay.php?f=12)
-   -   90 plus turbo headgasket replacement trick to know! (https://forums.turbobricks.com/showthread.php?t=365454)

sbabbs 09-06-2022 07:45 PM

90 plus turbo headgasket replacement trick to know!
Take out this one stud then you can take off head and put back without touching turbo or manifold, it just stays in place there. Granted if you do not take out this one stud you can but you tweak the manifold holding bracket and scratch the bottom of the head on the alignment dowls...


See how tight the hole around that one stud is compared to all the rest? That is the alignment stud hole! Follow me for more pro tips....


Ohh also my efn email is done.. I got outlook email simonbabbs at outlook.cum

whatshouldido 09-06-2022 08:33 PM

very nice !

All times are GMT -4. The time now is 02:58 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.