Turbobricks Forums

Turbobricks Forums (https://forums.turbobricks.com/index.php)
-   maintenance & nonperformance (https://forums.turbobricks.com/forumdisplay.php?f=12)
-   -   940: strut rod nut and sway bar bolt (https://forums.turbobricks.com/showthread.php?t=358833)

mschultz373 01-25-2021 11:28 PM

strut rod nut and sway bar bolt
 
does anyone have the measurements for the 940 strut rod nut AND the bolt for the sway bar end line that bolts into the knuckle?

thanks.

<a href="https://ibb.co/t8ndcJK"><img src="https://i.ibb.co/r4qWMw0/strut-rod-bolt.jpg" alt="strut-rod-bolt" border="0"></a>
<a href="https://ibb.co/Vxdg5pp"><img src="https://i.ibb.co/0KkCvVV/sway-bar.jpg" alt="sway-bar" border="0"></a>

Fa182 01-26-2021 03:25 AM

I believe the nut is a standard M14 and the bolt is a M12x45mm

p/n's below:
https://www.tascaparts.com/oem-parts...ock-nut-985660
&
https://www.tascaparts.com/oem-parts...e-screw-982842

mschultz373 03-30-2021 07:25 PM

what's correct installation for the strut rod bolt? Lost my driver side bolt on a turn yesterday. I was using a hardware store locknut, tried to get it as tight as I could. Locktite??

dl242gt 04-01-2021 02:34 PM

That hardware strore locknut may not be the higher grade of steel needed for the application. I'd suggest buying the genuine part if you don't have a local supplier that can sell you grade 8 metric hardware. It may even be a grade 10 piece of hardware. The bolt and nut should be torqued to spec with the weight of the car on the suspension. Probably something like 65-70ftlbs.


All times are GMT -4. The time now is 08:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.