home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Search Forums

Showing results 1 to 50 of 300
Search took 0.10 seconds.
Search: Posts Made By: ZVOLV
Forum: maintenance & nonperformance Today, 10:14 PM
Replies: 2
Views: 132
Posted By ZVOLV
-Torn intake hose at the turbo -Torn...

-Torn intake hose at the turbo
-Torn intercooler hoses
-Torn Idle Air hoses

What is the O2 voltage? Warmed up and at idle.
Forum: maintenance & nonperformance Today, 10:12 PM
Replies: 7
Views: 283
Posted By ZVOLV
A driveway test

Without a lift:

Jump 12v to the tank fuel pump fuse and listen thru the fuel filler for fuel splashing back into the tank. Or check at the fuel return hose at the rail (maybe put a hose on the...
Forum: maintenance & nonperformance Today, 10:09 PM
Replies: 7
Views: 362
Posted By ZVOLV
0.85V means it is stuck rich. You could...

0.85V means it is stuck rich.

You could have leaking injectors or possibly a bunk ECM. Or ECT sensor.
Forum: maintenance & nonperformance Today, 03:38 PM
Replies: 7
Views: 187
Posted By ZVOLV
Voltage drop test

^^^^

Put one meter lead to the alt case and the other to a good engine ground. With a load on the circuit (engine running) you don't want to see more than 0.25V (250 millivolts). If the ground...
Forum: maintenance & nonperformance Today, 03:32 PM
Replies: 2
Views: 74
Posted By ZVOLV
Don't fire parts-darts. Do diag.

Don't fire parts-darts. Do diag.
Forum: performance & modifications Today, 03:29 PM
Replies: 27
Views: 4,204
Posted By ZVOLV
A cracked turbine housing can cause low boost. ...

A cracked turbine housing can cause low boost.

I wouldn't blame the guy that did the work.
Forum: maintenance & nonperformance Yesterday, 06:25 PM
Replies: 7
Views: 187
Posted By ZVOLV
Perform voltage drop tests.

Perform voltage drop tests.
Forum: maintenance & nonperformance 09-17-2021, 12:37 PM
Replies: 19
Views: 666
Posted By ZVOLV
I vote check PCV.

I vote check PCV.
Forum: maintenance & nonperformance 09-16-2021, 03:38 PM
Replies: 7
Views: 1,064
Posted By ZVOLV
Put it back to stock and recheck.

Put it back to stock and recheck.
Forum: performance & modifications 09-14-2021, 02:43 PM
Replies: 27
Views: 4,204
Posted By ZVOLV
The highest octane fuel you can get. You...

The highest octane fuel you can get.

You will wanna fix all the soggy hoses and leaking vacuum lines. Maybe clean the injectors professionally.
Forum: performance & modifications 09-14-2021, 11:59 AM
Replies: 27
Views: 4,204
Posted By ZVOLV
Get a used 15G/16T turbo from Swedish Iron and a...

Get a used 15G/16T turbo from Swedish Iron and a wastegate bracket from yoshifab.

You will be blowing that old headgasket in no time!
Forum: maintenance & nonperformance 09-04-2021, 02:27 PM
Replies: 10
Views: 522
Posted By ZVOLV
Everybody should have a TEST LAMP

Did you reground the wires at the fuel rail? Those are for the ECM.

Install a test lamp BACKPROBED into the fuel injector connectors (peel back the boot) Key on- lamp should be lit. Crank- lamp...
Forum: maintenance & nonperformance 09-04-2021, 02:00 PM
Replies: 14
Views: 681
Posted By ZVOLV
An engine can run with the battery removed, but...

An engine can run with the battery removed, but you aren't supposed to do it. That being said, I think I recall my old 740 stalling at stoplights from loose battery cables.

I also work on certain...
Forum: maintenance & nonperformance 09-04-2021, 01:55 PM
Replies: 10
Views: 522
Posted By ZVOLV
Remove the upper timing cover and look down into...

Remove the upper timing cover and look down into the lower cover with a strong flashlight. There is a notch on the belt guide and line it up with the raised ridge on the engine.
Forum: maintenance & nonperformance 09-03-2021, 08:17 PM
Replies: 14
Views: 681
Posted By ZVOLV
Is your battery secured? Crappy battery terminals?

Is your battery secured? Crappy battery terminals?
Forum: maintenance & nonperformance 09-03-2021, 02:43 PM
Replies: 14
Views: 681
Posted By ZVOLV
Wiggle test the wiring

Wiggle test the wiring
Forum: maintenance & nonperformance 09-03-2021, 02:32 PM
Replies: 11
Views: 1,555
Posted By ZVOLV
I know these cars burn valves up. What's the...

I know these cars burn valves up.

What's the result of the cylinder drop test?
Forum: maintenance & nonperformance 09-03-2021, 01:02 AM
Replies: 17
Views: 3,161
Posted By ZVOLV
A/C leak

I would bring it back to the shop and have them recover it. The machine will weigh how much is evacuated.

With an old car, you could have leaks anywhere, but the condenser is the first place I...
Forum: performance & modifications 08-27-2021, 05:13 PM
Replies: 23
Views: 1,637
Posted By ZVOLV
A cracked/melted turbine housing can cause low...

A cracked/melted turbine housing can cause low boost.
Forum: maintenance & nonperformance 08-24-2021, 03:56 PM
Replies: 6
Views: 1,352
Posted By ZVOLV
I've seen bunk reman generators right outta the...

I've seen bunk reman generators right outta the box.
Forum: maintenance & nonperformance 08-24-2021, 02:09 PM
Replies: 6
Views: 1,352
Posted By ZVOLV
It doesn't sound like you are doing the parasitic...

It doesn't sound like you are doing the parasitic drain test correctly.

You should NOT just connect a meter between a loose cable and the battery terminal. You can blow the fuse in your meter and...
Forum: maintenance & nonperformance 08-24-2021, 11:13 AM
Replies: 11
Views: 1,555
Posted By ZVOLV
I would try to look at fuel trims with a scan...

I would try to look at fuel trims with a scan tool, but on a 97 850 you would probably need VIDA. Misfire counter would be great too.


You can try to spray around with brake cleaner and listen...
Forum: maintenance & nonperformance 08-24-2021, 12:07 AM
Replies: 11
Views: 1,555
Posted By ZVOLV
An air leak could be the problem.

An air leak could be the problem.
Forum: maintenance & nonperformance 08-16-2021, 11:29 PM
Replies: 20
Views: 3,590
Posted By ZVOLV
Unplug the TPS and the ECT connectors. Unplug the...

Unplug the TPS and the ECT connectors. Unplug the ECU/EZK boxes and remove the sheaths. BACKPROBE the connectors and confirm less than about 2 ohms tip to tip. I like to see 0.3 ohms on the ol Fluke...
Forum: maintenance & nonperformance 08-16-2021, 03:58 PM
Replies: 20
Views: 3,590
Posted By ZVOLV
I forget, can the IAC plug be crossed with the...

I forget, can the IAC plug be crossed with the TPS plug?

I would peel back the boot on each connector and inspect the terminal crimps for corrosion. You also wanna check each wire on the circuit...
Forum: maintenance & nonperformance 08-12-2021, 09:24 PM
Replies: 21
Views: 4,090
Posted By ZVOLV
Just slam the pinion nut on with a strong gun,...

Just slam the pinion nut on with a strong gun, counter-holding the pinion flage with your bare hand, and then FEEL the preload. No English or Metric units needed.
Forum: maintenance & nonperformance 08-09-2021, 09:46 PM
Replies: 21
Views: 4,090
Posted By ZVOLV
Pinion bearings get a pre-load measurement, NOT a...

Pinion bearings get a pre-load measurement, NOT a torque spec.

It is the amount of force required to turn the pinion flange. It isn't very much force.
Forum: maintenance & nonperformance 08-02-2021, 08:33 PM
Replies: 20
Views: 1,691
Posted By ZVOLV
When I worked at Volvo, the guys had whiteblock...

When I worked at Volvo, the guys had whiteblock timing belts down to under 30 minutes. Re-time it and see what happens.
Forum: maintenance & nonperformance 08-02-2021, 01:40 PM
Replies: 20
Views: 1,691
Posted By ZVOLV
I would get a fresh belt and tensioner and put it...

I would get a fresh belt and tensioner and put it together and hope for the best.

Three teeth probably isn't enough to bend the valves, but you don't know how much it has jumped all together. You...
Forum: maintenance & nonperformance 08-02-2021, 10:04 AM
Replies: 16
Views: 1,421
Posted By ZVOLV
Unless you have an injector or a machine that...

Unless you have an injector or a machine that injects the oil, you gotta just dump it in an opening.
Forum: maintenance & nonperformance 08-02-2021, 10:03 AM
Replies: 20
Views: 1,691
Posted By ZVOLV
Have you confirmed the crank mark aligns with the...

Have you confirmed the crank mark aligns with the cam marks?
Forum: maintenance & nonperformance 08-01-2021, 05:12 PM
Replies: 20
Views: 1,691
Posted By ZVOLV
You can HEAR no compression. It would be cranking...

You can HEAR no compression. It would be cranking fast.

Low/no compression on all 6 cylinders=no bueno. If your compression, ignition, timing were good it would run on starting fluid.

The...
Forum: maintenance & nonperformance 08-01-2021, 03:59 PM
Replies: 20
Views: 1,691
Posted By ZVOLV
Does it run on starting fluid? Click my sig....

Does it run on starting fluid? Click my sig. Clear flood, disable fuel, try starting fluid.
Forum: maintenance & nonperformance 08-01-2021, 03:40 PM
Replies: 16
Views: 1,421
Posted By ZVOLV
You only need a high side port for diagnosis. I...

You only need a high side port for diagnosis. I do all my A/C repairs thru the low side. I would probably just add 2 oz of ester oil in there for good measure.

I use an oil injector, but you can...
Forum: maintenance & nonperformance 08-01-2021, 03:33 PM
Replies: 19
Views: 1,658
Posted By ZVOLV
Yeah on a old car like this, I would expect about...

Yeah on a old car like this, I would expect about a 5-7 milliamp draw normally.

And buy a switch for $5 and put a post/screw into each side of the switch to clip leads onto. On a modern car with...
Forum: maintenance & nonperformance 08-01-2021, 03:05 PM
Replies: 19
Views: 1,658
Posted By ZVOLV
If you don't have a switch, you can just use a...

If you don't have a switch, you can just use a jumper wire. Connect a jumper wire to a disconnected cable terminal and the battery terminal, connect the meter, then remove the jumper wire. It's...
Forum: maintenance & nonperformance 08-01-2021, 01:30 AM
Replies: 19
Views: 1,658
Posted By ZVOLV
It sounds like you have a bad battery.

It sounds like you have a bad battery.
Forum: maintenance & nonperformance 07-31-2021, 08:39 PM
Replies: 19
Views: 1,658
Posted By ZVOLV
I use a special tool to do parasitic battery...

I use a special tool to do parasitic battery drains. It is just a cutoff switch. You connect your meter, THEN open the switch. That way, there is less of a chance of the draw going away and a...
Forum: maintenance & nonperformance 07-30-2021, 06:21 PM
Replies: 20
Views: 1,691
Posted By ZVOLV
You can just pull a plug, install it in the coil...

You can just pull a plug, install it in the coil and lay it against a good ground.

I would check spark on all 6 cylinders. It has two ignition amplifiers. It may not start on 3 cylinders.

Got...
Forum: maintenance & nonperformance 07-25-2021, 01:07 AM
Replies: 17
Views: 3,964
Posted By ZVOLV
You may find it pegged lean at 0.1V or pegged...

You may find it pegged lean at 0.1V or pegged rich at 0.9V. Check after engine has run for several minutes.

The ECM sounds suspect.
Forum: maintenance & nonperformance 07-25-2021, 12:29 AM
Replies: 17
Views: 3,964
Posted By ZVOLV
What's the O2 voltage when the issue is present?

What's the O2 voltage when the issue is present?
Forum: maintenance & nonperformance 07-24-2021, 08:51 PM
Replies: 17
Views: 3,964
Posted By ZVOLV
What is the fuel pressure? You can't just say " I...

What is the fuel pressure? You can't just say " I have pressure at the rail."
Forum: maintenance & nonperformance 07-24-2021, 07:25 PM
Replies: 17
Views: 3,964
Posted By ZVOLV
Ok so it runs, but it runs like ****? You...

Ok so it runs, but it runs like ****?

You could have a massive air leak or barely any fuel pressure.

Pull the codes with the OBD blinky thing.
Forum: maintenance & nonperformance 07-17-2021, 01:44 AM
Replies: 5
Views: 1,190
Posted By ZVOLV
You have melted wiring on the resistor. Get an...

You have melted wiring on the resistor. Get an OEM resistor replacement. It isn't easy to swap. It will take you an entire weekend on the first try.

The shop likely just added a fitting to...
Forum: performance & modifications 07-14-2021, 04:38 PM
Replies: 16
Views: 3,448
Posted By ZVOLV
Does not a spark plug fit?

Does not a spark plug fit?
Forum: maintenance & nonperformance 07-09-2021, 01:37 AM
Replies: 20
Views: 3,590
Posted By ZVOLV
****tt grounds at the intake?

****tt grounds at the intake?
Forum: maintenance & nonperformance 07-08-2021, 09:38 PM
Replies: 13
Views: 2,883
Posted By ZVOLV
SERVICE light just means it's time for an oil...

SERVICE light just means it's time for an oil change.
Forum: maintenance & nonperformance 07-05-2021, 03:13 PM
Replies: 13
Views: 2,883
Posted By ZVOLV
Which codes are stored?

Which codes are stored?
Forum: maintenance & nonperformance 07-03-2021, 12:50 PM
Replies: 3
Views: 1,203
Posted By ZVOLV
The fuse holder/fuses are suspect. The...

The fuse holder/fuses are suspect.

The positive junction block on the driver fender too.
Forum: projects & restorations 06-27-2021, 04:48 AM
Replies: 118
Views: 70,466
Posted By ZVOLV
Don't smoke your clutches. Once you start...

Don't smoke your clutches. Once you start slipping, you are burning things up.

You haven't hit fuel cut yet? (5V on the MAF)
Showing results 1 to 50 of 300

 
Forum Jump

All times are GMT -4. The time now is 10:57 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.