View Single Post
Old 03-02-2014, 05:06 PM   #7
The Librarian
hiperfauto's Avatar
Join Date: Nov 2011
Location: So Cal

You'll need these -8 AN to 16mm x 1.5 Male adapters and crush washers for the oil thermostat and these 1/2 BSP Female to -8 AN Male adapters for the oil cooler.

If your using the replacement oil cooler, you'll need a different fitting.

Setrab makes a nice mounting bracket for the oil coolers if you want to relocate.

Last edited by hiperfauto; 11-28-2016 at 02:21 AM.. Reason: corrrected wrong fitting size
hiperfauto is online now   Reply With Quote