View Single Post
Old 06-11-2022, 08:53 PM   #3
John242Ti
LH-Jet & Carb Free Zone
 
John242Ti's Avatar
 
Join Date: May 2003
Location: Duvall, WA
Default

Quote:
Originally Posted by mike66 View Post
Hello, I’m about to swap a J type overdrive/ iron case M46 into my 89 745T to replace a bad P Type. My questions are, can I just weld the end of the speedometer drive shut, and does the speedo gear need to be in there or can I just toss it. Thanks in advance.

Remove the speedo drive housing and tap in a freeze plug.
__________________

1982 242Ti - black, B23FT/M46 combo.
@john242ti on IG
John242Ti is offline   Reply With Quote