View Single Post
Old 07-26-2016, 09:44 AM   #11
Barracuda_82
Board Member
 
Join Date: Nov 2015
Location: The Netherlands
Default

Indeed. The alarm brain does have a relay and it was just a matter of wiring this to the indicator circuit. After looking at the diagrams I figured the easiest way was to splice them in right after the emergency light switch. If you take this out of the dash and remove the plug on the back the pins are numbered. The ones that say "L" and "R" correspond to the lift and right indicator circuits (what a surprise!). Splice the wires in behind the plug and solder the wires from the brain to them and you're done. Easy!
Barracuda_82 is offline   Reply With Quote