View Single Post
Old 02-24-2007, 02:29 PM   #3
BB-Q
(. )( .)
 
BB-Q's Avatar
 
Join Date: May 2005
Location: Costa del Fylde
Default

Quote:
Originally Posted by towerymt View Post
This has been documented already by Kenny. Weld on an elbow.

Looks like you could use an elbow welded onto the compressor outlet as well to aim it at the IC.
Kenny's documenting of it must have been before my time. I've got some 32mm aluminium tube which I could prep for an elbow and get welded to a water pump.
Good idea on the compressor outlet- I hadn't thought of that. I'll have a hunt around for some 65mm aluminium tube. That could well work out cheaper than a silicone elbow reducer.

Good thinking that man- did you get my stickers?
__________________

Quote:
Originally Posted by foggyjames View Post
The man is a pimp, and a fast one at that...
Quote:
Originally Posted by frpe82 View Post
He's got that "crazy Mark" look in his eyes...........
1992 245 SE B200F, M47, Low and painfully slow.......

v8volvo240.com
BB-Q is offline   Reply With Quote