View Single Post
Old 07-12-2011, 10:23 AM   #25
kildea
Board Member
 
kildea's Avatar
 
Join Date: Dec 2005
Location: MA
Default

Doherty - You are not welding the small flyweights, just the one large weight. Look at the operation again and work through the stages with the video and you'll see why. You'd just bridge that gap between the weight and the case with a small chunk of metal and weld it at both sides - don't go crazy and you'll be able to grind it off if you need to get into the diff.
kildea is offline   Reply With Quote