View Single Post
Old 04-24-2021, 07:29 PM   #18
BeaverMeat
Board Member
 
BeaverMeat's Avatar
 
Join Date: Aug 2020
Location: Vancouver Island
Default

This thing has got me floored. Lol

The sender is working. Did the hot water test, etc, etc. Tested it in the car... works. Ran the car till the tester was at 60ohms and shut it off.

With the ignition on, engine off the gauge quickly goes to where the temp should bb then it slowly maxes out to the top. Start the engine and it quickly goes back to where the temp reading should be then it slowly bottoms out.

I guess the gauge is faulty? Idk wtf... the signal wire shows just under 12v if that means anything.
__________________
Quote:
She’s built like a steakhouse but, she handles like a bistro.
BeaverMeat is offline   Reply With Quote