LC4CARL
Aero challenged
- Joined
- Sep 8, 2008
- Location
- Vancouver, WA
Installed the IPD seat grid in the driver's seat. Scored $3.47 in loose change and some debris I'd rather not think about.
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I searched. Does a flat hood fit on an '87? If memory serves there's a cowl fitment problem.
Yes it is misaligned there. Does not affect function at all only formThe fit issue is where the hood drops in the center, but the cowl goes straight across?
Nice looking 240 BTW.
OK. Next problem...
I have three gauge clusters: The original, broken electric speedo / no tach. An old cable speedo with a tach. And a "working" electric speedo with tach.
I swapped in the "working" electric speedo / tach unit and the car would not run. So I unplugged everything and it ran. So, then took the tach out of analogue speedo assembly and put that in the original broken electric speedo and it runs, has a functioning tach, but still has the broken speedo.