Anyone here ever used a universal clutch setup for stick swapped 700/900 series? I am swapping in a T5 and with how hard the 700/900 clutch/brake pedal setup is to find here in the states, It would seem more economic to me to fab in a universal clutch pedal. Am just curious if anyone here has done it.
-
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software hereThank you for being a part of our community!
Universal Clutch for 700/900 Series
- Thread starter linkkjm
- Start date
- Joined
- Dec 23, 2006
- Location
- Rushing Lane, Scappoose, OR
Not universal, made for 740 hydraulic setup. Seems there is a site in UK that sells steel ones, buy one of those.
http://www.retroturbo.com/?product=volvo-740-940-hydraulic-clutch-pedal
Not universal, made for 740 hydraulic setup. Seems there is a site in UK that sells steel ones, buy one of those.
http://www.retroturbo.com/?product=volvo-740-940-hydraulic-clutch-pedal
Thats a start, would still need to fab up the brackets.
PCH
Well-known member
- Joined
- Oct 25, 2008
- Location
- Oxnard, SoCal
Volvo Parts may still have pedals in stock- I'd check with them first.
You need only the left side bracket and bolt for the clutch pedal. Otherwise it's the same.
redblockpowered
bad username length
- Joined
- May 5, 2015
- Location
- Swampscott, MA
Mine had the left side bracket already. Just needed the pedal and hardware.
I went down the rabbit hole earlier today and figured this out lmao. Bracket is on the way now lol