marcusj2001
Member
- Joined
- Jun 12, 2018
- Location
- Sweden
Hello. This is my Volvo 740 project. It's a Volvo 744 with a B230FT turbo from the start with a stock 13c that was quickly replaced with a t3/t4 turbo. But a liked the bottom end torque with the 13c for towing and drivability. But the 13c runs out of air so at the top end the t3/t4 was better so why not combine the two. So that is what I'm doing
But the 13c turbo is getting replaced with a 16t turbo for some more power down low.
picture of cad drawing(Not finish) But you get the ide. And what it looks looks like in the car right now. More parts are on there way and will likely arrive later this week
The wastegate between the two turbos is for back pressure control and how much the small turbo work.
Everything will be control by a Megasquirt 3X
But the 13c turbo is getting replaced with a 16t turbo for some more power down low.
picture of cad drawing(Not finish) But you get the ide. And what it looks looks like in the car right now. More parts are on there way and will likely arrive later this week
The wastegate between the two turbos is for back pressure control and how much the small turbo work.
Everything will be control by a Megasquirt 3X