View Single Post
Old 05-29-2021, 10:02 AM   #1
Board Member
Jerd's Avatar
Join Date: Mar 2008
Location: Vancouver WA
Default 240 ball joint stud taper angle and diameter?

1992 240 ABS.

I'm hoping to learn what the factory ball joint stud receiver dimensions are. I'm certainly going to run into a hard bind with the amount of droop travel I'm planning to run, and I would like to make my own ball joint extension and mount. Lots of cool aftermarket universal style ball joints out there, hoping to narrow down the selection by learning the OE stud type.


Last edited by Jerd; 05-31-2021 at 10:17 AM..
Jerd is offline   Reply With Quote