tomasss
former PRVert
- Joined
- Oct 13, 2008
- Location
- Sydney, Australia
Last 80mm intake pipe arrived yesterday, so here we go...
Last edited:
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
You are completely right (and God bless you and turbobricks for that remark ).Your oil drain doesn't really look like it's a nice gravity drain (...)
Agree. Mine made a similar sound on first run after re-assembly. It was not there next time I started it up.Lifters need time to fill up. Warm the oil up and take it for a spin around the block. Mid-revs, light load...
That should do the trick. If not, check oil pressure...