• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Slammed 240's (show them to me)

IMG_20131103_091852.jpg
 
What's you're setup?

Homemade :cameron: coilovers with Kaplhenke top hats, Koni Red struts, H&R 250lb springs, summit sleeves. I have yoshifab lower braces and a kalplhenke strut brace, poly everything. Rear is RSI adjustable perch with 8.5'' 200lb spring, IPD adjustable panhard and torque rods and stock Bilstein HD (I am swapping to a shorter shock ASAP).

If I were to do it again or if this were a serious build I would definitely have done short strut coilovers. Also gone with slightly stiffer springs, and had shocks/struts re-valved to match. I'm not trying to go lower or do more than auto-x so this works great for now because it was cheap, coilovers cost me $250.
 
Back
Top