View Single Post
Old 04-07-2021, 12:23 PM   #4
Fa182
Stage 1
 
Fa182's Avatar
 
Join Date: Apr 2016
Location: Austria
Default

Well there's not much happening below 2,500 on my B230FT either.
I'm also running a 16T at around 0,9bar.

Just an idea.
Are you running the stock Intercooler? That's quite a big limiting factor I've found after swapping to a 16T.
I was very disappointed because I've almost didn't notice anything.
It was only after upgrading to a KL Intercooler. See here: https://forums.turbobricks.com/showthread.php?t=343520

Also, how does your AFR look?
465cc injectors could be too big if you're not running a lot of boost pressure.
I'm still using stock sized injectors and they're plenty, AFR is perfectly fine with my setup.

EDIT: Are you using custom chips? I've bought a nice set from here and I'm very happy with them, gave a very nice upgrade.
__________________
Fa182 is offline   Reply With Quote