Thread: Maximum RPMs
View Single Post
Old 10-17-2020, 11:38 PM   #25
The MP
mikep's Avatar
Join Date: May 2003
Location: 38į 27' N 75į 29' W

I have found that on a big sweeping course iíll shift to 3rd and keep smooth.
But if you need a bit more and want to stay in 2nd, hereís the idea i was going to throw at you: set up the new gearset with new pinion bearings. keep the 4.10 ring gear, and the 4.10 pinion with the bearings and crush sleeve.
Use synthetic gear lube, i usually donít need much if any modifier. Or use gear lube with modifier. Or strain your oil through a coffee filter. It takes a while but i donít stand there and watch it.
mikep is offline   Reply With Quote