View Single Post
Old 11-25-2020, 11:10 PM   #6
Dirty Rick
Board Member
Dirty Rick's Avatar
Join Date: Apr 2013
Location: Cornholio, OR

You can leave the Stoich and AFRs set to gas numbers so you don't have to translate.
Lambda is Lambda, it does not change with the fuel.
Remember AFRs are not measured, they are calculated from Lambda.

Injector dead time settings will come into play in the idle area also. So get those right as possible early on.
I don't know who I am when I am somebody else.
Dirty Rick is offline   Reply With Quote