View Single Post
Old 09-06-2022, 07:45 PM   #1
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default 90 plus turbo headgasket replacement trick to know!

Take out this one stud then you can take off head and put back without touching turbo or manifold, it just stays in place there. Granted if you do not take out this one stud you can but you tweak the manifold holding bracket and scratch the bottom of the head on the alignment dowls...




See how tight the hole around that one stud is compared to all the rest? That is the alignment stud hole! Follow me for more pro tips....

Lightning

Ohh also my efn email is done.. I got outlook email simonbabbs at outlook.cum
__________________
1988 245 White slicktop M47 Wagon! 93 b230f. LH 2.4 STS flat flywheel.
1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 555K
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in.
1995 940 White racing wagoon. 13c.
sbabbs is offline   Reply With Quote