Eaton TrueTrac worth it?

I've been gathering a ton of parts over the past few months for a 16V turbo + T5WC setup.

I'm just curious as to if it's worth it to rebuild the axle with a TrueTrac 912A588 Locker or if it's worthwhile / cost effective to swap in another axle like an Explorer 8.8 with disc brakes (I know this usually requires cut & weld of the whole axle tube and shaft).

I'd rather not do all these upgrades to the stock dana 30 and have it explode or something.

yes

I haven't enjoyed mine for about....eh....45 minutes. 100k on mine so far, worth every dang penny.

Also yes

I'm an early user with one. It has been well worth it.

Sweet, thanks guys! TrueTrac will be ordered