ping23
New member
- Joined
- Oct 23, 2011
- Location
- lansdale pa
I have a 91 740 with non abs, the one hardline for the brakes has a very badly stripped fitting. I need to know the thread pitch for it so I can get a new line and bend it. TIA.
-
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software hereThank you for being a part of our community!
brake line fitting thread pitch?
- Thread starter ping23
- Start date
lummert
Active member
- Joined
- Jan 11, 2008
- Location
- Portland IN
M10x1.0
ping23
New member
- Joined
- Oct 23, 2011
- Location
- lansdale pa
Bubble flare or inverted?
TempleUWS6
Member
- Joined
- Feb 18, 2014
- Location
- Celebration, FL
Bubble
ping23
New member
- Joined
- Oct 23, 2011
- Location
- lansdale pa
And I guess the only other thing I need to know is, is the fitting fully threaded?
ping23
New member
- Joined
- Oct 23, 2011
- Location
- lansdale pa
.
ping23
New member
- Joined
- Oct 23, 2011
- Location
- lansdale pa
Bump.
lummert
Active member
- Joined
- Jan 11, 2008
- Location
- Portland IN
MistrThou
Masked Moogle
- Joined
- Oct 8, 2004
- Location
- Janesville, WI
Here's some good pictures. http://forum.ih8mud.com/threads/question-about-brake-line-fittings-cutting-and-flaring.779567/
The fitting is comprised of the nut and the tube. You flare the tube. The nut is threaded all the way to the hex where the wrench goes.
The fitting is comprised of the nut and the tube. You flare the tube. The nut is threaded all the way to the hex where the wrench goes.
ping23
New member
- Joined
- Oct 23, 2011
- Location
- lansdale pa
Thanks guys.