View Single Post
Old 06-03-2021, 03:43 PM   #6
Board Member
Join Date: Nov 2017
Location: Houston

I put on an external cooler I bought on amazon. It was super easy to install(both on my 90 and 93). It actually works so well it draws heat out of the radiator(used my infrared thermometer to check temps coming and going). I have mine going from the transmission to the external cooler then back to the factory cooler. I used brass fittings from homedepot to go in between the radiator and the hard lines so I didn't cut anything. Would only take a minute or so to undo by removing the adapters and then attaching the lines back to the radiator.

jjona5 is offline   Reply With Quote