Jerd
Active member
- Joined
- Mar 1, 2008
- Location
- Vancouver WA
Installed poly torque rod bushings, Installed BNE Select strut mounts, bought rotors, need to buy new lines, need to buy pads, need to buy tires. Shes taking on my money, boys.
I went with position "3" for the strut mounts which gives me the most positive caster. However you can not rotate the mount out very far due to some interference between the billet aluminum plate and the inside of the strut tower. Its forcing me to have way to much negative camber due to the fact that my control arms are also extended. I might have to move it to position 1 just so i can tune out some of the negative camber. Sucks because i really wanted the added caster. I might just hack some aluminum off this thing so i can dial the camber out.
I went with position "3" for the strut mounts which gives me the most positive caster. However you can not rotate the mount out very far due to some interference between the billet aluminum plate and the inside of the strut tower. Its forcing me to have way to much negative camber due to the fact that my control arms are also extended. I might have to move it to position 1 just so i can tune out some of the negative camber. Sucks because i really wanted the added caster. I might just hack some aluminum off this thing so i can dial the camber out.
Last edited: