Thread: Vintage 140 Linkage Solutions?
View Single Post
Old 03-31-2021, 05:17 PM   #2
hiperfauto
The Librarian
 
hiperfauto's Avatar
 
Join Date: Nov 2011
Location: So Cal
Default

The DGMS linkage uses the original firewall bushing for the rear of the cross shaft. The front will ride in a heim joint on the manifold.

DCOE manifolds typically have mounts for the cross shaft.

With either setup the linkage rod from the pedal connects to an arm on the cross shaft just like with the SU's.
hiperfauto is online now   Reply With Quote