View Single Post
Old 04-04-2021, 10:25 PM   #4
Board Member
bobxyz's Avatar
Join Date: Aug 2014
Location: Boulder CO

MicroSquirt is easy - connect the Opto +/- wires to the 2 tabs on the coil -/+ (they cross Opto+ to - tab).

CDI is the same thing as an add-on MSD red high-voltage multi-spark ignition box, not the factory Bosch Breakerless ignition.

Once you want to go beyond Fuel Only, you'll need a LH2.2 distributor, or will need to modify the Turbo K-Jet distributor to lock down the vacuum and centrifugal advance mechanisms.
bobxyz is offline   Reply With Quote