View Single Post
Old 05-11-2021, 11:14 AM   #5
Stiggy Pop
Board Member
 
Stiggy Pop's Avatar
 
Join Date: Feb 2011
Location: Granville, MA
Default

Quote:
Originally Posted by oldschoolvolvo View Post
-full SuperPro poly in the front is good, could also consider STS delrin bushings, but probably unnecessary for a street car.
-Yoshifab lower chassis braces
-GT upper braces

What you have listed for the rear is good, keeping rubber bushings on the chassis-side mounting points. Poly or spherical there will be buzzy.
I absolutely hate my Yoshifab lower braces and can't wait to get them off the car. They are the low hanging fruit under a low car by a good margin, in the worst possible place. There's probably a gouge in the Lime Rock autocross course from mine still.

If your car is lowered I would not use a brace that puts 2" of tube sticking straight down at a right angle to your cross member just waiting to catch every dip, crack, pothole or bad angle it can find.
__________________
'79 242
943 pickup
Stiggy Pop is offline   Reply With Quote