View Single Post
Old 05-29-2021, 09:30 AM   #1
Swedbrick
Board Member
 
Swedbrick's Avatar
 
Join Date: Oct 2016
Location: Netherlands, Source of Grolsch
Default EV turbobrick - the turbobrick way?

Since I'm still kind of stoked on the idea of building a hybrid/full EV turbobrick, let's have a discussion on how to do it with cheap junkyard/Chinese parts.

Stuff I've ran into:
Fork truckmotor on the driveshaft
https://www.diyelectriccar.com/threa...good-one.7598/

Chinese hub motors for the front wheels maybe?
http://www.cnqsmotor.com/en/article_list_91.html

Tesla motor, this guy is doing a pretty cool job with those in his shed, recommended watch:p
https://youtu.be/DxxaHYlCuN8

Mercedes 48v e-alternator setup, fast and simple but weak?
https://x-engineer.org/automotive-en...s-continental/

Theoretical benchrace budget let's say 2-3k including some Chevy volt batteries, or a DIY laptop battery pack. Tesla stuff is also good but $$$ from what I've seen, in a wagon the spare wheel well should provide plenty of space with decent weight distribution
__________________
Volvo 745 - IPD springs, 25mm/19mm swaybars, T-cam, LH2.4, M90 swap, 3.54 \w racingdiff lsd, track/daily
---------------------------------
I sell LH2.4 Chips for Europe!
Swedbrick is offline   Reply With Quote