View Single Post
Old 12-06-2020, 07:18 PM   #6
Board Member
sbabbs's Avatar
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR

If you did this-- I got the 940 engine harness wired into

And that is a turbo engine harness it should have the resistor pack as part of it and then if you used high impedance injectors, same problem you might have burned up your ECU injecktor driver.

Post what your setup really is.
1988 245 White slicktop M47 Wagon! 93 b230f. LH 2.4 STS flat flywheel.
1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 548K
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in.
1995 940 White racing wagoon. 13c m90 to put in
sbabbs is offline   Reply With Quote