View Single Post
Old 04-09-2021, 05:44 AM   #5
majkelos
Newbie
 
Join Date: Apr 2021
Location: Poland
Default

Quote:
Originally Posted by Fa182 View Post
Well there's not much happening below 2,500 on my B230FT either.
I'm also running a 16T at around 0,9bar.

Just an idea.
Are you running the stock Intercooler? That's quite a big limiting factor I've found after swapping to a 16T.
I was very disappointed because I've almost didn't notice anything.
It was only after upgrading to a KL Intercooler. See here: https://forums.turbobricks.com/showthread.php?t=343520

Also, how does your AFR look?
465cc injectors could be too big if you're not running a lot of boost pressure.
I'm still using stock sized injectors and they're plenty, AFR is perfectly fine with my setup.

EDIT: Are you using custom chips? I've bought a nice set from here and I'm very happy with them, gave a very nice upgrade.
As for the AFR - on stock injectors and 1bar boost it was not very good, at the full throttle it was running lean mixture. I need to install some additional gauge and sensor in my exhaust, that's for sure.
majkelos is offline   Reply With Quote