View Single Post
Old 04-13-2021, 04:31 PM   #3
The Librarian
hiperfauto's Avatar
Join Date: Nov 2011
Location: So Cal

The 164 M400 bell housing doesn't fit the B20 engine. Also, the input shaft splines are larger as is the front seal housing that the T/O bearing rides on. The clutch cable is also completely different.

What you really need is an M410 from a '70 1800E or any later M40/41 that has the stronger gears. With an O/D trans you'll also need the special trans cross member.
hiperfauto is offline   Reply With Quote