Turbobricks Forums - View Single Post - Bleeding brake system without opening FR caliper valves?

Mr. V · 11-24-2021, 03:33 PM

I'd remove the caliper from the car and put it in a vise to try and work the stuck fitting off as stated above.

If it breaks you can either drill it out, re-tap it and put in and oversize fitting or simply toss it and buy a new one.

11-24-2021, 03:33 PM	#4
Mr. V Board Member Join Date: Jul 2004 Location: Portland, Oregon metro	I'd remove the caliper from the car and put it in a vise to try and work the stuck fitting off as stated above. If it breaks you can either drill it out, re-tap it and put in and oversize fitting or simply toss it and buy a new one.