View Single Post
Old 04-03-2021, 01:52 PM   #2
bobxyz
Board Member
 
bobxyz's Avatar
 
Join Date: Aug 2014
Location: Boulder CO
Default

Normally, for fuel-only, you tap off the coil negative "-" tab. You need to build the MS2 Coil Negative circuits.

I don't know how Bosch Breakerless connects the 2 VR signals from the distributor. If it grounds one of the signals, you might be able to tap off the other VR wire to MS. (MS expects one of the 2 VR wires to be grounded.)
__________________
'85 245glt b21ft aw71 k-jet -> lh2.4
bobxyz is offline   Reply With Quote